0.72 g/t Au over 76.2 m including 1.26 g/t Au over 6.1 m
0.98 g/t Au over 15.2 m and 0.81 g/t Au over 27.4 m
VANCOUVER, B.C. – Liberty Gold Corp. (LGD-TSX) (“Liberty Gold” or the “Company”) is pleased to announce results from its ongoing Reverse Circulation (RC) drilling at the Goldstrike Project, the flagship of its three principal gold projects located in the prolific Great Basin of the United States. Located in southwestern Utah, Goldstrike is a past-producing, oxide-heap leach gold mine that contains a large, shallow, district-scale, Carlin-style gold system.
In 2018, The Southwest Goldstrike Trend (Beavertail Area) was drill-tested both within and outside of gold resources1 contained within the Preliminary Economic Assessment2 (“PEA”) pit. Results have been received for 19 holes to date, with additional results pending.
To the west of the resource area and PEA pit, drilling targeted a large area with surface gold-in-soil anomalies and associated jasperoid alteration (West Beavertail). Shallow oxide gold mineralization was encountered in multiple drill holes, extending drill-tested gold mineralization over 300 metres from the Main Beavertail area. The mineralized zone remains open for extension to the south and west. Future drilling will focus on bringing the new extension into the existing resource model.
Drill Highlights include:
GOLDSTRIKE DEPOSIT (BEAVERTAIL MAIN) – INFILL AND STEP-OUT WITHIN AND ADJACENT TO CURRENT RESOURCE AREA
Hole ID (Az, Dip) (degrees) |
From (m) |
To (m) |
Intercept (m) |
Au (g/t) |
Au Cut-Off |
Hole Length (m) |
Target |
Comments |
g/t x m |
PGS589 (230, -65) |
7.6 |
36.6 |
29.0 |
0.56 |
0.2 |
202.7 |
Western |
Beavertail |
30.2 |
and |
48.8 |
54.9 |
6.1 |
0.36 |
|||||
and |
89.9 |
103.6 |
13.7 |
0.85 |
|||||
PGS591 (145, -65) |
0.0 |
76.2 |
76.2 |
0.72 |
0.2 |
135.6 |
Western |
Beavertail |
55.1 |
incl |
15.2 |
21.3 |
6.1 |
1.26 |
1 |
||||
PGS594 (40, -70) |
9.1 |
24.4 |
15.2 |
0.98 |
0.2 |
105.2 |
Western |
Beavertail |
37.3 |
and |
35.1 |
62.5 |
27.4 |
0.81 |
|||||
PGS596 (60, -55) |
0.0 |
21.3 |
21.3 |
0.79 |
0.2 |
196.6 |
Western |
Beavertail |
26.5 |
and |
32.0 |
42.7 |
10.7 |
0.26 |
|||||
and |
68.6 |
77.7 |
9.1 |
0.52 |
|||||
and |
93.0 |
100.6 |
7.6 |
0.28 |
|||||
Hole ID (Az, Dip) (degrees) |
From (m) |
To (m) |
Intercept (m) |
Au (g/t) |
Au Cut-Off |
Hole Length (m) |
Target |
Comments |
g/t x m |
PGS655 (325, -69) |
3.0 |
35.1 |
32.0 |
0.44 |
0.2 |
141.7 |
Western |
Beavertail |
32.6 |
and |
42.7 |
70.1 |
27.4 |
0.68 |
|||||
PGS656 (67, -65) |
3.0 |
15.2 |
12.2 |
0.35 |
0.2 |
147.8 |
Western |
Beavertail |
29.0 |
and |
29.0 |
61.0 |
32.0 |
0.37 |
|||||
and |
68.6 |
70.1 |
1.5 |
0.42 |
|||||
and |
86.9 |
89.9 |
3.0 |
1.03 |
|||||
and |
100.6 |
115.8 |
15.2 |
0.60 |
|||||
PGS657 (235, -65) |
0.0 |
27.4 |
27.4 |
0.38 |
0.2 |
105.2 |
Western |
Beavertail |
26.1 |
and |
33.5 |
42.7 |
9.1 |
0.31 |
|||||
and |
48.8 |
54.9 |
6.1 |
0.57 |
|||||
and |
61.0 |
79.2 |
18.3 |
0.51 |
|||||
PGS660 (180, -50) |
0.0 |
15.2 |
15.2 |
0.39 |
0.2 |
129.5 |
Western |
Beavertail |
42.6 |
and |
16.8 |
50.3 |
33.5 |
0.88 |
0.2 |
||||
incl |
33.5 |
44.2 |
10.7 |
1.47 |
1 |
||||
and |
85.3 |
89.9 |
4.6 |
1.51 |
0.2 |
||||
PGS661 (65, -45) |
0.0 |
13.7 |
13.7 |
0.49 |
0.2 |
99.1 |
Western |
Beavertail |
37.5 |
and |
19.8 |
56.4 |
36.6 |
0.80 |
|||||
and |
64.0 |
67.1 |
3.0 |
0.46 |
Defined terms: grams per tonne (“g/t”), gold (“Au”), Azimuth (“Az”), metres (“m”)
WEST BEAVERTAIL
Hole ID (Az, Dip) (degrees) |
From (m) |
To (m) |
Intercept (m) |
Au (g/t) |
Au Cut-Off |
Hole Length (m) |
Target |
Comments |
g/t x m |
PGS648 (0, -65) |
7.6 |
27.4 |
19.8 |
0.46 |
0.2 |
138.7 |
Western |
West Beavertail |
9.2 |
PGS649 (180, -65) |
0.0 |
10.7 |
10.7 |
0.40 |
0.2 |
134.1 |
Western |
West Beavertail |
12.5 |
and |
21.3 |
29.0 |
7.6 |
0.96 |
|||||
and |
39.6 |
42.7 |
3.0 |
0.31 |
|||||
PGS650 (180, -65) |
6.1 |
24.4 |
18.3 |
1.24 |
0.2 |
123.4 |
Western |
West Beavertail |
26.8 |
and |
44.2 |
47.2 |
3.0 |
0.44 |
|||||
and |
50.3 |
54.9 |
4.6 |
0.25 |
|||||
and |
57.9 |
61.0 |
3.0 |
0.44 |
SOUTHWEST EXTENSION (BEAVERTAIL AND WEST BEAVERTAIL) KEY POINTS
- The Goldstrike Resource in the Beavertail area is characterized by a contiguous body of mineralization that starts at surface and was partially mined by the historic operators
- Infill and step out drilling by Liberty Gold demonstrates that mineralization extends laterally beyond as well as below the limit of historic drilling.
- Liberty Gold discovered a new zone of mineralization extending to the west of the Goldstrike deposit (West Beavertail). It has been tested by 19 holes to date, with assays pending for 12 additional holes. The zone extends westward from the historic pit at least 300 m and is open to the south and west.
- The zone lies on surface at the collars of holes PGS646, PGS648 and PGS650, which are spaced approximately 100 m apart, and is marked by abundant jasperoid float.
- Unlike other areas of the Goldstrike deposit, mineralization in this area is entirely hosted in Upper Paleozoic carbonate rocks. This is the first significant “stand alone” test of carbonate rocks by Liberty Gold. With roughly half the property underlain by Paleozoic carbonate strata at surface, the potential for additional mineralization hosted in this rock type is significant.
- Pending holes test areas to the south and up to 100 metres west of the holes reported in this release. All contain zones of jasperoid alteration similar to alteration in the highlighted holes.
GOLDSTRIKE GRABEN (CONDEMNATION DRILLING FOR HEAP LEACH PAD SITE)
The Goldstrike Graben area in the Western Zone was subject to condemnation drilling to assess suitability for location of a heap leach pad. Results ranged from No Significant Results to a high of 0.35 g/t Au over 6.1 m and 1.03 g/t Au over 3.0 m and 0.39 g/t Au over 3.0 m in PGS606. Combined with drilling from previous years, it is clear that there may be areas of gold mineralization inside the proposed PEA heap leach pad footprint that could warrant some follow-up work but, at present, most of the area appears to be better suited for location of infrastructure.
For a complete table of drill results from the current holes, please click here: http://libertygold.ca/images/sites/default/files/GS_Intercepts11052018.pdf
For a map of drill collars and traces for the current release, please click here: http://libertygold.ca/images/sites/default/files/Goldstrike11052018.pdf
Liberty Gold continues to meet its project enhancement goals in 2018, commencing with a maiden resource estimate released in February3. The PEA4, published in July 2018, is based on a resource that includes drill results through the end of 2017 (1730 holes). 2018 drilling was focused on 1) infill and expansion of the resource; 2) testing of the historic heap-leach, stockpile and waste dump areas that are largely situated within the PEA pit and counted as waste in the PEA pit model (see August 16, 2018 press release); and 3) testing of new targets property-wide. An amendment to the current Plan of Operations to grant access to an additional >878 acres in and adjacent to the resource area is expected in the final quarter of 2018.
Goldstrike is located in the eastern Great Basin, immediately adjacent to the Utah/Nevada border, and is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada’s Carlin trend. Like Kinsley Mountain and Newmont’s Long Canyon deposit, Goldstrike represents part of a growing number of Carlin-style gold systems located off the main Carlin and Cortez trends in underexplored parts of the Great Basin. The historic Goldstrike Mine produced gold at an average head grade of 1.2 g/t Au and an average recovery of approximately 75%.
Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and validated that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t. Drill intersections are reported as drilled thicknesses. True widths of the mineralized intervals vary between 30 and 100% of the reported lengths due to varying drill hole orientations, but are typically in the range of 60 to 80% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and completed with a gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.200 ppm an additional cyanide leach analysis is done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then centrifuged and analyzed by AAS. QA/QC for all drill samples consists of the insertion and continual monitoring of numerous standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko prep lab listed on the scope of accreditation.
ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring the Great Basin of the United States, home to large-scale gold projects that are ideal for open-pit mining. This region is one of the most prolific gold-producing regions in the world and stretches across Nevada and into Idaho and Utah. We know the Great Basin and are driven to discover and advance big gold deposits that can be mined profitably in open-pit scenarios. Our flagship projects are Goldstrike, Black Pine and Kinsley Mountain, all of which are past producing open-pit mines, where previous operators only scratched the surface.
For more information, visit www.libertygold.ca or contact:
Susie Bell, Manager, Investor Relations
Phone: 604-632-4677 or Toll Free 1-877-632-4677
All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the meaning of applicable securities laws, including statements that address potential quantity and/or grade of minerals, potential size and expansion of a mineralized zone, proposed timing of exploration and development plans, expected capital costs at Goldstrike, expected gold and silver recoveries from the Goldstrike mineralized material, potential additions to the resource through additional drill testing, potential upgrade of inferred mineral resources to measured and indicated mineral resources, the potential for silver resources at Goldstrike and intentions to pursue a silver resource study and beliefs regarding gold resources being contained within a larger property area. Forward-looking information is often, but not always, identified by the use of words such as "seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe", "potential", and similar expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results "may", "should", "could", "would", "might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of gold, and other metal prices, currency exchange rates and interest rates, favourable operating conditions, political stability, obtaining governmental approvals and financing on time, obtaining renewals for existing licenses and permits and obtaining required licenses and permits, labour stability, stability in market conditions, availability of equipment, accuracy of any mineral resources, the availability of drill rigs, the accuracy of a preliminary economic assessment, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on factors and events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.
Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future results expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on technical information provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans continue to be refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; the timing and success of exploration activities generally; delays in permitting; possible claims against the Company; labour disputes and other risks of the mining industry; delays in obtaining governmental approvals, financing or in the completion of exploration as well as those factors discussed in the Annual Information Form of the Company dated March 26, 2018 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile at www.sedar.com.
The mineral resource estimates referenced in this press release use the terms "Indicated Mineral Resources" and "Inferred Mineral Resources." While these terms are defined in and required by Canadian regulations (under NI 43-101), these terms are not recognized by the U.S. Securities and Exchange Commission ("SEC"). "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. The SEC normally only permits issuers to report mineralization that does not constitute SEC Industry Guide 7 compliant "reserves" as in-place tonnage and grade without reference to unit measures. U.S. investors are cautioned not to assume that any part or all of mineral deposits in these categories will ever be converted into reserves. Liberty Gold is not an SEC registered company.
Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise unless required by law
1See press release dated February 8, 2018
2See press release dated July 16, 2018
3See press release dated February 8, 2018
4See press release dated July 16, 2018